Antminer A3, 815GH/s.

Antminer A3, 815GH/s.

Description:

Specifications and other information of the Antminer A3 are as mentioned below.

Please select the correct address for shipping before you submit your order because, for this batch, the shipping address cannot be changed after the order has been submitted.

Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.

The shipping for this batch will be arranged within 10 working days after Bitmain has received full payment. We advise you to research and prepare in advance for customs' clearance in your country to avoid delays or unexpected costs.

You will need an ATX PSU with at least 10 six-pin PCIe connectors. There are 3 six-pin PCIe connectors on each hashing board and all three need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. Bitmain recommends the APW3++ to power the A3.

Separate power supply to control board: there is one additional six-pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10 PCIe connectors are connected to a power supply..

Features and Specifications:

Hash ASIC type - BM1720.

Hashing algorithm - Blake(2b).

Total quantity of hash chips - 180 chips.

Total quantity of hash boards - 3 boards per miner.

Total hash rate - 815GH/s ± 5%.

DC voltage input - 11.60~13.00 V.

DC current input @12V DC - 98.8 A + 7%.

DC Power @12V DC input - 1186 W +7%.

220VAC Power @25℃, 93% conversion efficiency of APW3 - 1275 W + 7%.

220VAC Power efficiency @25℃, 93% conversion efficiency of APW3 - 1.56mJ/MH + 7%.

Weight (without package) - 4.2 kg.

Operation temperature - 0-40 ℃.

Storage temperature -40-85 ℃.

Operation humidity - 5%RH-95%RH, prevent condensation.

Noise - 76 dB.

Networking connection mode.

Ethernet Cable – 18.

Power connection mode:                 

All three PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent  the control board to be powered up before hash boards be powered up.

Size (Length*Width*Hight,without package) - 321mm*125mm*208mm.

Package Including:

1 x Antminer A3, 815GH/s (without PSU).

Attention! The price for this equipment is exhibited individually, depending on availability in the warehouse or pre-order. Delivery to your country is also calculated individually, depending on the delivery service and the form of delivery (air, car, express, etc.). Please write to the address indicated at the bottom of the text.

You can see official acoounts our company:

Made-in-China: http://www.made-in-china.com/showroom/beiker888

Alibaba: https://cn1500459308.onesite.alibaba.com

For more details and wholesale catalog, please contact our managers.

Wholesaler - special rates and conditions.

sales@china-sells.com

Waiting for your orders!